Precision engineering in rooftop pipe supports is a critical aspect that extends beyond conventional roofing components. The longevity and success of these supports primarily depends on its capability of bearing the weight of essential commercial equipment.
This often includes:
- Gas lines,
- Electrical conduit,
- HVAC equipment,
- Condensers,
- Ductwork, and more
The expected life of these rooftop supports should ideally be at least two decades. However, to ensure that this lifespan is adequately completed, it requires careful consideration on part of the building owner as well as the installer.
To ensure that you are catering to the complexities of choosing the right support product, here are essential factors every engineer and contractor should consider.
Considerations for Rooftop Equipment Supports
1. Material Compatibility with Roof Types
Understanding the roofing material is key when selecting rooftop pipe supports. Commercial rooftops vary, including:
- EPDM,
- TPO,
- PVC,
- Asphalt decks, and
- Metal roofs.
Naturally, each material comes with its unique properties and lifespan. Considering the "toughness" of different membranes is crucial when selecting the roof support types. It is also equally important to avoid sharp supports that might puncture the roof membrane. Subtle material choices contribute to the overall longevity of the roofing system.
In high-end commercial spaces, where the emphasis is on superior materials and enduring quality, PHP Systems/Designs provides rooftop support solutions that seamlessly complement the diverse roofing materials.
Ensuring the right blend of toughness and compatibility, our supports are engineered to uphold the integrity of premium roofing membranes.
2. Adherence to Local Building Codes
Knowledge of local building codes is indispensable for rooftop pipe support selection. Regulations are in place to safeguard public health and welfare, and staying informed about trends in other territories can offer valuable insights.
Awareness of banned materials and evolving codes, such as the restriction of certain supports, is crucial. Engineers and contractors must align their choices with these codes to ensure compliance and safety.
PHP Systems/Designs prioritizes compliance with local building codes, offering rooftop pipe support solutions that meet or exceed regulatory standards. Our commitment to safety and adherence to evolving codes ensures that our products seamlessly integrate into high-end commercial constructions.
3. Consideration for Certifications: LEED Credits
When it comes to rooftop pipe supports, sustainability is more than just a way of providing value. It is a crucial consideration for compliance and energy efficiency as well. That’s where established code and design principles in the industry come into play.
Leadership in Energy and Environmental Design (LEED) Credits may not be part of building codes, but their impact on green building initiatives is significant. Engineers and contractors, especially in high-end projects, should factor in supports that align with LEED criteria for a more environmentally conscious approach.
PHP Systems/Designs offers rooftop pipe supports designed with sustainability in mind. Our products contribute to LEED initiatives by providing solutions that enhance building efficiency while minimizing environmental impact.
4. Tailoring to Seismic Zones, Wind Uplift, & Other Variables
Customizing rooftop pipe supports based on job-specific requirements, such as seismic considerations and wind uplift, is imperative. High-end commercial buildings demand more than traditional support systems to preserve structural integrity and protect equipment.
The adaptability of supports to various conditions ensures long-term reliability. Over the years PHP Systems/Designs has made a name for itself by providing tailored rooftop pipe supports to specific job and location needs.
Our supports are crafted to withstand seismic activity, high winds, and adverse weather conditions, providing a robust solution for high-end commercial constructions. Whether it is a winter storm, strong winds, hail, or more; our solutions are built to last.
5. Incorporating Gasket, Slip Sheet, or Supplemental Pad
Enhancing the seismic system and improving wind uplift, the addition of a gasket or slip sheet under the rooftop support offers multiple benefits. This not only simplifies installation but also provides an extra layer of protection between the roofing membrane and the pipe support.
Our rooftop pipe supports come equipped with innovative features, including options for gaskets and slip sheets. Our solutions prioritize ease of installation and heightened protection for the roofing membrane, ensuring a seamless fit in high-end commercial roofing applications.
6. Climate-Resistant Material Selection
Considering the harsh impact of climate on rooftop supports is crucial for their long-term durability. This step is more than simply making it wind or seismic activity resistant, but also when it comes to daily wear and tear. Climate-resistant materials to be used for rooftop supports include:
- UV-stabilized materials,
- EPDM rubber,
- Corrosion-resistant metal,
- Weather-resistant coating, and more.
Choosing materials that withstand extreme weather conditions ensures sustained performance over the roof's lifespan. PHP Systems/Designs acknowledges the significance of climate resistance in rooftop pipe supports.
Our products are crafted from materials that endure the harshest weather conditions, providing a reliable and long-lasting solution for high-end commercial rooftops.
7. Adequate Planning & Spacing for Optimal Support
Determining the layout of the rooftop equipment support structure is a critical aspect of ensuring not only the support’s longevity but also worker safety. It is important to ensure that high wind sway and stress on the structure do not lead to friction between parts. This can lead to breakage and impact the life of your structure.
Furthermore, when it comes to spacing, balancing cost considerations with adequate support involves factoring in several elements. These include:
- Local codes,
- The type of pipe or equipment being supported,
- Seasonal weather variations,
- Roof type,
- Contents of the pipe,
- Frequency of workers accessing rooftops, and
- Pipe temperature.
Each variable contributes to the overall effectiveness and reliability of the support system. PHP Systems/Designs is known across the industry for offering a range of rooftop pipe supports with customizable spacing options.
This way, we ensure that high-end commercial constructions receive optimal support tailored to their specific requirements. Our solutions prioritize a harmonious balance between cost-effectiveness and robust support.
Conclusion
The critical role of precision engineering in rooftop pipe supports cannot be overstated, especially in the context of high-end commercial roofing systems. PHP Systems/Designs emerges as a frontrunner, offering tailored solutions that blend seamlessly with diverse roofing materials.
Our solutions also adhere to stringent local building codes, contribute to sustainability through LEED initiatives, and withstand the challenges of varied conditions and climates. If you are seeking an unparalleled synergy of innovation, reliability, and adaptability in rooftop pipe supports, PHP Systems/Designs invites you to explore the next level of excellence.
Enhance your high-end commercial construction projects by calling PHP Systems/Designs at 800.797.6585 for a quick quote on your project. Discover how our precision-engineered solutions can redefine the durability and performance of your rooftop supports.
